Stool Famna 2020 - 75x75x40 cm, Orange Legs, Gabriella Gustafson & Mattias Ståhlbom | Svenskt Tenn

To book a personal visit outside of opening hours please contact info@svenskttenn.se

Accept our processing of cookies

Your shopping bag

  • Product information
    Design:
    TAF Arkitekter
    Material:
    Wooden frame
    Size:
    75x75 cm
    Seat height:
    40 cm

    Fabric requirement: 130 cm: 1,7 m | 150 cm: 1,7 m | Leather: 20,0 sq.ft.| Velvet: 1,7 m | Velvet without direction: 1,7 m

    Core of coil springs and stuffed with foam rubber. Stool legs in beech.

    The stool is handcrafted in Sweden.

  • Design

    The Famna (Embrace) stool are designed by the Stockholm-based design and architecture studio TAF, founded by Gabriella Gustafson and Mattias Ståhlbom. 

    Designer

    Gabriella Gustafson & Mattias Ståhlbom

    Gabriella Gustafson & Mattias Ståhlbom

    The Stockholm-based design and architecture studio TAF is founded by Gabriella Gustafson and Mattias Ståhlbom. Since the company was established in 2002, TAF has received international attention through its work on everything from exhibitions, interior, and product design. The designs have been exhibited at MoMa in New York and are part of both the Swedish National Museum's and the Danish Design Museum's permanent collections.

  • Care instructions

    Svenskt Tenn’s furniture is made from wood that is varnished or coated. Clean with a soft cloth dampened with mild dish detergent or soapy water. Dry with a soft cloth. Do not expose the furniture to prolonged humidity or direct heat or use polish, oil or abrasive cleaners on the furniture. Also avoid exposing the furniture to large changes in temperature and humidity.

    The legs are screwed on and may need to be tightened from time to time. Vacuum clean the exposed surfaces with a soft brush.

    Contact a furniture restorer if the coating or wood gets damaged, as it can get worse if not tended to.

    Use a mild detergent without bleach. Avoid soaking in water and temperatures below 40 degrees Celsius as the colour can fade. Do not spin dry on a vigorous cycle. Drip dry. Fabrics can shrink by approximately 3-5 percent when washing.

  • Sustainability and manufacturing

    Material

    Svenskt Tenn’s furniture is manufactured using traditional methods. Our upholstered furniture is manufactured by one of the oldest furniture manufacturers in the country. The cushions are stuffed with down and synthetic down. The down is cleaned with an environmentally friendly detergent and is then sterilised and dried at 120 degrees Celsius to ensure that any bacteria or other impurities have been completely removed. The factory is OEKO- TEX 100 Standard, Class 1 certified, which is the highest possible standard. It is also quality certified in accordance with ISO 9001.

    Production

    Producing Svenskt Tenn’s upholstered furniture is a time-consuming process that requires great craftsmanship. A team of exceptional furniture makers, seamstresses and upholsterers lies behind the production, led by the fourth generation of the Sjögren family.

    O.H. Sjögren’s furniture factory in Tranås has been producing upholstered furniture for Svenskt Tenn since 1982. The factory was founded back in 1902 by Oskar Herbert Sjögren, who early on specialised in the production of sofas and armchairs. Over time production has changed and developed, but the original idea of producing the highest conceivable quality remains the same today, more than 100 years later.

    Nowadays, the company is run by brothers Håkan och Jakob Sjögren, whose goal is to preserve solid quality and craftsmanship, in the same way as their grandfather did at the beginning of the 1900s. Many skilled craftsmen are needed for the work to succeed, and they are all responsible for various stages in the process.

    When the production begins, it is the furniture maker who is responsible for the first stage, namely the furniture’s timber frame. This can comprise up to 50 different wooden parts and each part is sawed and put together by hand. The frame is based on solid Swedish pine, and as with nearly all of the components, is purchased from local suppliers.

    The framework of the furniture begins with the fitting of springs and nozag feathers. The seat has an innerspring resting on nozag feathers, and the back normally contains just nozag feathers, which are specially adapted to each model. When that part is completed, the soft upholstery sections are applied. Each model has up to 20 specially designed components, which differ in thickness and hardness. The components are built up in different layers for maximum comfort, taking into account where in the furniture they are placed. The furniture details are designed by hand, which gives the piece its final form.

    The fabric that will be used to cover the upholstered furniture is rolled out on a cutting board and cut according to templates. A patterned fabric requires more material since both buttons and the joining edges must match as much as possible. The cut-out parts are then sewn together to fit the furniture. The varying characteristics of fabrics require different seam allowances and sewing techniques. Finally, the furniture is upholstered with the selected fabric.

    Sustainability in focus

    Read more about Svenskt Tenn's Sustainability Philosophy below.

  • Dela
  • Ladda ned som PDF

Stool Famna 2020 Width 125 cm Repeat 155 cm, Linen 450, Brazil, Multi

19,570 SEK (incl. VAT)

Delivery within 10 – 12 weeks (The delivery time may vary during summer and Christmas). The product is handcrafted after ordering.